Description

Barco G62-W11 WUXGA DLP Laser Phosphor Projector 11K Lumens

Lens not included. Contact a Sales Representative for available lenses

The G62-W11 expands Barco’s single-chip offering with a quality WUXGA projector of 11.000 lumens. It opens up the possibilities to a wider range of applications while still relying on the valued Barco service and support.

The laser phosphor light source ensures great image quality, on the one hand, but also lower maintenance compared to most lamp-based projectors on the market. Thanks to Barco’s Projector Toolset software, installing and managing your projector(s) can be done from the comfort of your own computer.

The G62 models enable HDMI™ 2.0 input capabilities and higher bandwidth than its predecessors, which makes them 4K compatible and 3D capable to visualize your high-quality content at its best.

The projectors are available in black and fully white chassis, allowing you to choose the perfect fit for your specific environment. Their uniform compact size, the compatibility with other Barco products and the wide lens shift range enlarge the projectors flexibility.

General specifications

Projector type: Single chip DLP laser phosphor projector
Resolution: 1,920 x 1,200 (WUXGA)
Brightness: 10,000 ANSI lumens
10,600 center lumens
11,000 ISO lumens
Brightness uniformity: 90%
Contrast ratio: 1,200:1 sequential; 6,000:1 dynamic; Extreme black: 750,000:1
Light source: Laser phosphor
Light source lifetime: Up to 20,000hrs
Aspect ratio: 16:10
Orientation: 360° rotation, no restrictions
Sealed DLP™ core: Yes
Color correction: Yes
CLO (constant light output): Yes
Image processing: Embedded warp & blend possible via Ptoolset
3D: Active stereoscopic 3D
Lens type: G-lenses – 0.36:1 / 0.37-0.4:1 / 0.65-0.75:1 / 0.75-0.95:1 / 0.95-1.22:1 / 1.22-1.53:1 / 1.52-2.92:1 / 2.90-5.50:1
Optical lens shift: Vertical up to 100%, depending on lens: Horizontal up to 30%, depending on lens
Motorized zoom and focus
Motorized lens shift
Inputs: 2x HDMI™ In (version 2.0) (with locking screw) / 1x DVI-D (only support digital signal) / 1x HDBaseT / 1x 3D SYNC In / 1x 3G-SDI
Input resolutions: Up to 4K @60Hz: Refresh rates: 24Hz to 60Hz for WUXGA and 4K/4KUHD (4096 x 2160 / 3840 x 2160)
4K input signals will be scaled to the projector’s output resolution
Software tools: Projector Toolset and Insight Management Suite (IMS)
Control: IR, RS232, RJ45, 3.5mm phone jack for wired remote
Network connection: 10/100 Ethernet, RJ45
Power requirements: 100-240V / 50-60Hz
Power consumption: 810W nominal, 970W maximum
Standby power: less than 0.5W
BTU per hour: 2,747 BTU/h nominal; 2883 BTU/h maximum
Noise level (typical at 25°C/77°F): 35dB(A) – 39dB(A) depending on the used mode
Operating temperature: 0 ~ 40 °C (sea level)
Operating humidity: 10 – 85% RH, non-condensing
Storage temperature: -10 ~ 60 °C
Storage humidity: 5 – 90% RH, non-condensing
Dimensions (WxLxH): without feet: 484 x 529 x 195 mm / 19.1 x 20.8 x 7.7 inch
with feet: 484 x 529 x 206 mm / 19.1 x 20.8 x 8.1 inch
Weight: without lens: 22.7 kg / 50.1 lbs
Standard accessories: Power cord, wireless remote control
Certifications: CE, FCC Class A, cTUVUS, CCC, EAC, KCC, RCM, BIS, BSMI